Products Descriptiong
YN-916 is a one part, neutral cure, high quality silicone sealant which withstands very high temperatures:up to +315°C during permanent work and up to +365° C for temporary contact. It has excellent adhesion properties to most building materials including and engine applications: Gasket marker, glass and glazed surfaces, ceramics,enamel impregnated and painted wood.
Features & Benefits
1.High temperature resistance.
2.Makes gaskets that resist high temperature and mostfluids.
3.Instant gasket cures to a tough silicone.
4.Forms gasket instantly from the tube,any size,any shape.
5.Resist to ageing,water,oil,grease and vibration.
Applications
1.Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2.In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3.Pierce the seal with the cap, cover the mouth, cut bevelthe tube mouth.
4.Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeezeout at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5.The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness.
6.Curing at normal temperature 24 hours.
Colors
Standard color: Red, Grey, Black
Special Color: Contact us for special color
Surface Preparation
Clean all grease, dirty, water, klunky sealant from surface,- accessories and protective coatings and any pollutant left inside joints and sunken parts. For best results wipe all surfaces with Homey cleaner, methylated spirits or acetone, use a lint free cloth, then wipe again with a dry lintfree cloth. Detergent or soap water treatments are not recommended.
Compatibility Testing
Incompatibility of glazing materials can lead to sealant discoloration and/or loss of adhesion. To help protect against these problems and to ensure compatibility, HOMEY will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.)and other HOMEY Silicone Sealants.
Limitation
1.This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.
2.Material removed from containers may be contaminated during use.
3.Do not return product to the original container.
4.Cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representative.
Caution
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
Storeage And Useable Life
12 months from manufacture date when store in cool dry locations below 25 ℃, keep away from heat source and direct sunlight during storage.
| TDS |
| As Supplied Tested at 23℃ and 50% RH |
| YuNuo High-Temp Silicone | YN916 |
| Tooling Time/Minutes | 5-10 |
| Tack free time/Minutes | 20-30 |
| Complete Set-Up Time/Hour | 24 |
| Application Temperature Rang °F(℃) | -20 to 122(-29 to 50) |
| As Cured-after 21 days at 23℃ and 50%H |
|
| Durometer Hardness, Shore A/Points | 38 |
| Tensile Strength/Psi | 325 |
| Elongation/% | 500 |
| Temperature Range (Continuous)F(℃) | -40 to 555(-40 to 315) |
| Movement Capability/% | ±25 |
Tel: +86-15966176633
