Liquid Nails Heavy Duty Construction Adhesive, YN-901,bridges gaps, provides ten minutes working time and produces a durable, flexible, and impact-resistant bond on heavy materials. This formula contains added antioxidants for excellent all-weather performance.

Bonds To: Wood, Treated Wood, Plywood, OSB, Wafer- board,Particleboard, Drywall, Concrete, Cementboard, Brick Veneers, and Tileboard.

Not recommended for plastics, vinyl, foamboard, ceramics, mirrors,granite, marble, ceiling tile, flooring, and subfloors. Not recommended for direct exposure to sunlight.
FREEZE/THAW STABLE. Store product at 40°F(4 ℃) to 100°F (38 ℃). USE PRODUCT WITHIN ONE YEAR OF PURCHASE.

Strong bond will outlast project.
Waterproof & Weatherproof.
Bonds a wide range of construction materials.
Interior & Exterior.
Strong, durable and flexible.
Exceptional holding power.
10 minute working time.
Bridges gaps.

BASE: Synthetic Rubber (Solvent)
COLOR: Tan
APPEARANCE: Smooth
APPLICATION TEMPERAT URE: 40°F to 100°F(4℃ to 38℃)
SERVICE TEMPERATURE: -20°F to 140°F(-29℃ to 60℃)
CONSISTENCY: Non-sag under normal conditions
EXTRUDABILItY: Easy to gun at room temperature
SHEAR STRENGTH: 24 hours - 225 psi
48 hours - 300 psi
7 days - >425 psi
WEIGHT PER GALLON: 9.4 lbs.(4.26 kg)
VISCOSITY: 230,000 cps
OPEN TIME: 10 minutes at room temperature
MINIMUM CURE TIME: 24 hours at room temperature
FREEZE/THAW STABILITY: No effect after 5 cycles
FLAMMABIUITY : Extremely flammable; non-flammable when dry
FLASH POINT: 1°F(-17℃)
PERCENT VOLA TILE: 35%
PERCENT SOLIDS: 65%
COVERAGE: Approximately 30 linear ft.(9 linear meters) using a 1/4"(6 mm) bead, for 10.0 FL
OZ tube. Approximately 85 linear ft. (26 linear meters),for 28 FL OZ tube.
SHELF LIFE: One year from date of purchase
ODOR: Mild Solvent
SPECIFICATIONS: Exceeds ASTM C557
MAX VOC: <40% by weight

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted, NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www .epa .gov/lead . Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Contact your local environmental regulatory agency for guidance on disposal of unused product.

Material: 40 to 1000F 4 to 38°C.
Ambient: 40 to 1000F 4 to 380C.
Substrate: 40 to 1000F 4 to 38°C.

Material: 40 to 1000F 4 to 38°C.
Ambient: 40 to 1000F 4 to 380C.
Substrate: 40 to 1000F 4 to 38°C.

Dry cloth when wet, scraping and mineral spirits when dry.

Surfaces must be clean, dry, and structurally sound. Paneling must be conditioned to room temperature for 24 hours. Please research all installation instructions and read label for safety, health, and environmental information. Cut cartridge tip to desired bead size, puncture foil seal inside the tip of the cartridge, and place cartridge into caulk gun. Cabinets & Countertops: Apply 1/4"(6 mm) bead to contact areas.
Press into place. Mechanical fasteners must be used for wall cabinets. Furring Strips or Studs: Apply 1/4"(6 mm) zigzag bead to each strip or stud. Press into place. Use nails at top and bottom. Drywall: Apply 1/4"(6 mm) bead to each stud, or two 1/4"(6mm) parallel beads to studs at drywall joints. Press drywall into place. Position drywall panels so that edges meet at stud center. Nail as required.

DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR. MAY CAUSE FLASH FIRE. HARMFUL IF INHALED. HARMFUL OR FATAL IF SWALLOWED. CAUSES RESPIRATORY TRACT IRRITATION. MAY CAUSE EYE IRRITATION. MAY CAUSE ALLERGIC RESPIRATORY REACTION. Sanding and grinding dusts may be harmful if inhaled. Inhalation of high concentrations of vapor may affect the central nervous system. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. High vapor concentrations can cause headaches, dizziness, drowsiness, and nausea and may lead to unconsciousness. This product contains crystal- line silica which can cause lung cancer or silicosis. The risk of cancer depends on the duration and level of exposure to dust from sanding surfaces. Can enter lungs and cause damage . Keep away from heat, sparks, and flame. Keep away from flames, such as pilot light, and any object that sparks, such as an electric motor. Do not breathe vapor. Do not swallow.
Do not get on skin or clothing. Avoid contact with eyes. Keep container tightly closed and sealed until ready for use. Wash thoroughly after handling. Provide fresh air ventilation during and after application and drying. Avoid the inhalation of dust or particulates arising from the applica- tion of this preparation. Use personal protective equipment as required. FIRST AlD: If swallowed, rinse mouth with water (only if the person is conscious). Call physician immediately. Do not induce vomiting unless directed to do so by medical personnel. If in eyes, rinse with water for 15 minutes. Check for and remove any contact lenses. If on skin, rinse well with water.
Wash with soap and water. Get medical attention if irritation develops. If inhaled, remove to fresh air. Call physician immedi- ately. Keep out of the reach of children.