Products Description
YN-M1520 MS Polymer Wood Flooring Adhesive is A high quality, trowel applied MS wood floor adhesive for bonding wooden floors to all common substrates . The formulation is completely water and solvent free thereby alleviating the likelihood of wooden boards cupping or crowning.
MS Wood Floor is based on the latest developments in hybrid polymer technology allowing for excellent workability and improved footfall sound-dampening . With an extended open time in excess of 40 minutes, this product is ideal for larger application areas
Application tips
1. Clean and dry, homogeneous, even, free from oils and grease, dirt and loose or friable particles. Paint and cement laitance must be removed.
2. The minimum rate of application should be no less than 600grms/m² but may be considerably more depending upon the trowel used.
3. Choose a suitable notched trowel to ensure a minimum 75% contact occurs between the adhesive layer and the underside of the flooring.
4. Remove any excess adhesive whilst still wet.
5. Clean all tools and application equipment with Sika Cleaner-208 immediately after use.
6. Will bond engineered and solid wood flooring directly to all common subfloors including concrete, wood, metal, ceramic tiles,composite board and most nature stone floors.
7.Elastic bonding of skirting boards / baseboards and door thresholds etc.
Features
1.1-component, ready to use.
2.100% solvent and water free, odourless.
3.Will not cause warpage or curl of wood blocks or planks.
4.Suitable for use with under floor heating.
5.Can be sanded.
6.Excellent workability.
7.Elastic, footfall sound dampening.
8.Suitable for all common types of wood floors.
9.Reduces stress on the substrate and also reduces stress transfer between the wood floor and the substrate.
| Technical Date |
| Appearance | paste |
| Density | 1.4±0.1g/cm³ |
| Skin Time | 40~120min |
| Viscosity,Pa.S | 800~2000 |
| Elongation at break | ≥200% |
| Shear strength Mpa | ≥0.6MPa |
| Heat aging peel strength(60℃) | ≥0.5MPa |
| Tensile strength Mpa | ≥1.2Pa |
| Hardness Shore A | 30~40 |
| VOCS | ≤15g/L |
| Coating property | Easy to coat |
Tel: +86-15966176633
